5 Most Common HVAC Issues in Colorado

As a homeowner in Colorado, you’re likely aware of the importance of keeping your HVAC system in good working order.

Unfortunately, even the best systems sometimes experience problems. In this blog post, we’ll take a look at some of the most common HVAC issues that homeowners in Colorado face. Today’s blog post will also provide some tips on how to address these issues.

Keep reading for more information!

Click the following link if you’re looking for reliable HVAC services in Berthoud, CO or one of the surrounding areas in Colorado.

#1 — Your furnace isn’t turning on

When you go to turn on your furnace and it doesn’t turn on, it can be frustrating. There are a handful of things that could be potentially causing the problem.

First, check to make sure that your furnace is plugged in and that the switch is turned to the “on” position.

Next, check the pilot light to see if it’s lit. If it’s not, you may need to relight it. Once you’ve checked these things, if your furnace still isn’t turning on, you may need to call a professional HVAC technician for help. In the meantime, you can use a space heater to keep your home warm and cozy.

#2 — Your furnace is making strange noises

If your furnace has been making strange noises, you’re not alone. It’s not uncommon for furnaces in Colorado to make strange noises if there’s an internal issue. Some examples of these issues include:

Furnaces can make strange noises when they’re old.
Your furnace is making strange noises because it’s dirty.
Furnaces can make strange noises when they need professional maintenance.
Your furnace is making strange noises because of a problem with the blower motor.
Furnaces can make strange noises when there’s a problem with the igniter.
Your furnace is making strange noises because of a problem with the gas line.

#3 — The furnace makes the house feel too hot or too cold

Your furnace is among the most important pieces of equipment in your home, and it’s also one of the most commonly overlooked. Many people think that the furnace is responsible for making the house feel too hot or too cold, but in reality, it’s just a tool that helps to regulate the temperature. The furnace works by circulating air through a series of ducts and vents.

The air is heated by a gas or electric coil, and then it’s distributed throughout the house by a blower. The furnace doesn’t actually control the temperature of the house; instead, it relies on thermostats to do that.

So if your furnace is making your house feel too hot or too cold, it’s likely due to a problem with your thermostat, not the furnace itself.

#4 — Air isn’t coming out of the vents

If you notice that air isn’t coming out of the vents in your home, there are a few potential causes.

Firstly, make sure that you check to see if the vents are closed. If they are, simply open them and see if that solves the problem. If not, the next step is to check the air filter. A clogged filter can restrict air flow and should be replaced every 1 to 3 months.

If the filter looks clean, the issue may be with the blower motor. This motor powers the fan that circulates air through the system and can burn out over time. If this is the case, it will need to be replaced by a professional.

Lastly, it’s possible that there is a leak in the ductwork. This can cause air to escape before it reaches the vents, and should be repaired as soon as possible.

#5 — Your water isn’t getting hot enough

You turn on the shower, wait a few minutes for the water to heat up, and step in… only to be greeted by a stream of lukewarm water. If your water isn’t hot enough, there are a few possible explanations.

First, the water heater may not be set to the correct temperature. Most units are factory-set to around 140 degrees Fahrenheit, but you may need to adjust it slightly higher or lower depending on your needs.

Another possibility is that the pilot light has gone out. This can happen if there’s a draft in the room or if the unit hasn’t been used in a while. relighting the pilot light should be fairly simple – just follow the instructions in your owner’s manual. Finally, if all else fails, it may be time to call a professional and have your water heater serviced.